LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Brake Control System And Diagnosis) >> Rear Brakes >> General Description >> Rear Drum Brake Assembly Construction

Rear Drum Brake Assembly Construction

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

The drum brake assembly has a self shoe clearance adjusting system so that drum-to-shoe clearance is maintained appropriate at all times. Rear brake is a drum type. It uses leading trailing operation when brake pedal is depressed and when parking brake is applied on level road.

It also uses duo servo operation when parking brake is applied on gradient road and load is applied in longitudinal direction of vehicle

For components, refer to "REAR BRAKE DRUM ASSEMBLY COMPONENTS:  ".

NOTE: Replace all components included in repair kits to service this drum brake. Lubricate parts as specified.
WARNING: If any hydraulic component is removed or brake line disconnected, bleed the brake system. The torque values specified are for dry, unlubricated fasteners.
scientia non olet · About LEMON Manuals