DTC P0335: Crankshaft Position Sensor - Circuit Malfunction: Condition
WARNING: This page is about a different car, the 2002 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
DTC is set when Engine Control Module (ECM) detects no Crankshaft Position Sensor (CKP) sensor input voltage for 2 seconds with engine cranking. Possible causes are:
- Open or short circuit between CKP and ECM.
- Crankshaft timing belt pulley teeth damaged.
- CKP sensor malfunction.
- CKP sensor dirty or loose.
- ECM malfunction.