Seat Belt Buckle Switch Inspection

WARNING: This page is about a different car, the 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Check continuity between seat belt buckle switch terminal A and B at the following condition. If seat belt buckle switch does not follow the above condition, replace seat belt buckle switch.

Seat belt buckle switch specification
1. Buckle out (seat belt not fastened) (1): Continuity
2. Buckle in (seat belt fastened) (2): No Continuity
Fig 1: Checking Continuity Between Seat Belt Buckle Switch Terminals
Courtesy of SUZUKI OF AMERICA CORP.