STEP 12. Check the fan controller at PCM connector C-112.

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect PCM connector C-112.
Turn the ignition switch to the "ON" position.

Fig 1: Locating & Identifying PCM Connector C-112

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Q: Do the radiator fan motor and condenser fan motor operate?

YES : Replace the PCM. Then go to Step 13.
NO : Replace the fan controller. Then go to Step 13.