>> C << Crankshaft Sprocket "B" Installation

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Clean and then degrease the front case of the front case, crankshaft sprocket "B" and crankshaft surface on which sprocket "B" is attached.

NOTE: Degreasing is necessary to prevent decrease in the friction between contacting surfaces.

Fig 1: Identifying Degrease Needed Surfaces Of Front Case, Crankshaft Sprocket B And Crankshaft Surface

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.