LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Overhaul) >> Timing Belt >> Removal And Installation >> Installation Service Points >> >> A << Camshaft Sprocket Installation

>> A << Camshaft Sprocket Installation

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the camshaft sprocket to the front of the camshaft.
  2. While holding the camshaft sprocket with special tools MB990767 and MD998719, tighten the camshaft sprocket bolt.
    1. Tightening torque: 88 +/- 10 N.m (65 +/- 7 ft-lb) 
      Fig 1: Tightening Camshaft Sprocket Bolt
      G01867849Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals