LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Overhaul) >> Front Case And Oil Pump >> Removal And Installation >> Removal Service Points >> << A >> Oil Pan Removal <2WD>

<< A >> Oil Pan Removal <2WD>

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove all oil pan bolts.
  2. Drive in special tool MD998727 between the cylinder block and oil pan.
    NOTE: Never use a screwdriver or chisel to remove the oil pan. It will deform the oil pan flange and result in oil leakage.
  3. Gently hit the special tool on its corner (shoulder), then slide it along the oil pan to remove it.
    Fig 1: Removing Oil Pan Using Special Tool - 2WD
    G01867929Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals