LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Overhaul) >> Front Case And Oil Pump >> Removal And Installation >> Installation Service Points >> >> O << Sealant Application To Oil Pressure Switch

>> O << Sealant Application To Oil Pressure Switch

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not block the oil passage with sealant.
  1. Apply 3M™ AAD Part number 8672 or equivalent to the threads of the oil pressure switch.
    Fig 1: Identifying Sealant Application Surface Of Oil Pressure Switch
    G01867957Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Tighten the switch to the specified torque.
    1. Tightening torque: 19 +/- 3 N.m (14 +/- 2 ft-lb)
scientia non olet · About LEMON Manuals