LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Overhaul) >> Front Case And Oil Pump >> Removal And Installation >> Installation Service Points >> >> B << Left Counterbalance Shaft Rear Bearing Installation

>> B << Left Counterbalance Shaft Rear Bearing Installation

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install special tool MB991603 to the cylinder block.
    Fig 1: Installing Special Tool MB991603 To Cylinder Block
    G01867937Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Apply engine oil to the rear bearing outer surface and bearing hole in the cylinder block.
  3. Using special tool MD998705, install the rear bearing.
    NOTE: The left rear bearing has no oil holes.
    Fig 2: Installing Rear Bearing
    G01867938Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals