LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Overhaul) >> Cylinder Head And Valves >> Inspection >> Valve Seat

Valve Seat

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the valve, then measure the valve stem projection between the end of the valve stem and the spring seating surface. If the measurement exceeds the specified limit, replace the valve seat.

  1. Standard value: 49.30 mm (1.941 inches) 
  2. Limit: 49.80 mm (1.960 inches) 
    Fig 1: Measuring Valve Stem Projection Between End Of Valve Stem And Spring Seating Surface
    G01867922Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals