LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Overhaul) >> Cylinder Head And Valves >> Inspection >> Valve Seat Reconditioning Procedure

Valve Seat Reconditioning Procedure

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before correcting the valve seat, check for clearance between the valve guide and valve and, if necessary, replace the valve guide.
  2. Using the seat grinder, correct to obtain the specified seat width and angle.
    Fig 1: Identifying Valve Seat Reconditioning Dimensions
    G01867923Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. After correcting the valve seat, lap the valve and valve seat using lapping compound. Then, check the valve stem projection.
scientia non olet · About LEMON Manuals