LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (On-Vehicle Service) >> Crankshaft Oil Seal >> Removal And Installation >> Removal Service Point >> << A >> A/T Drive Plate Bolts Removal

<< A >> A/T Drive Plate Bolts Removal

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use special tool MD998781 to secure the A/T drive plate.
  2. Remove the A/T drive plate mounting bolts.
    Fig 1: Removing A/T Drive Plate Mounting Bolts
    G01867777Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals