LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (On-Vehicle Service) >> Crankshaft Oil Seal >> Removal And Installation >> Installation Service Points >> >> B << A/T Drive Plate Bolts Installation

>> B << A/T Drive Plate Bolts Installation

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use special tool MD998781 to secure the A/T drive plate in the same manner as removal.
    Fig 1: Using Special Tool MD998781 To Secure A/T Drive Plate
    G01867779Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Tighten the A/T drive plate mounting bolts to the specified torque.
    1. Tightening torque: 132 +/- 5 N.m (98 +/- 3 ft-lb) 
scientia non olet · About LEMON Manuals