LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (On-Vehicle Service) >> Camshaft And Valve Stem Seal >> Removal And Installation >> Installation Service Points >> >> G << Camshaft Sprocket Installation

>> G << Camshaft Sprocket Installation

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold the camshaft sprocket with special tools MB990767 and MD998719 in the same manner as removal.
  2. Tighten the camshaft sprocket mounting bolt to the specified torque.
    1. Tightening torque: 89 +/- 9 N.m (65 +/- 7 ft-lb) 
    Fig 1: Holding Camshaft Sprocket With Special Tools MB990767 And MD998719
    G01867759Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals