LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (On-Vehicle Service) >> Camshaft And Valve Stem Seal >> Removal And Installation >> Installation Service Points >> >> A << Valve Stem Seals Installation

>> A << Valve Stem Seals Installation

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a small amount of engine oil to the valve stem seals.
    CAUTION:
    • Valve stem seals cannot be reused.
    • The special tool MD998774 must be used to install the valve stem seal. Improper installation could result in oil leaking past the valve guide.
  2. Use special tool MD998774 to fill a new valve stem seal in the valve guide using the valve stem area as a guide.
    Fig 1: Using Special Tool To Fill Valve Stem Seal In Valve Guide Using Valve Stem Area Guide
    G01867751Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals