LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Basic Diagnostic Procedures) >> Ignition Checks >> Noise Suppressor >> Grand Vitara, Vitara (2.0L) & XL-7

Grand Vitara, Vitara (2.0L) & XL-7

WARNING: This page is about a different car, the 2002 Suzuki XL-7, 2002 Suzuki Vitara, 2002 Suzuki Grand Vitara, 2002 Suzuki Esteem, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect harness connector from noise suppressor, taped to main engine wiring harness. See Fig 1. Using DVOM, ensure continuity is not present between terminals "A" and "B". See Fig 2. If test result is not within specification, replace noise suppressor.

Fig 1: Locating Noise Suppressor (Grand Vitara, Vitara 2.0L & XL-7)
G99E51049Courtesy of SUZUKI OF AMERICA CORP.
Fig 2: Testing Noise Suppressor (Grand Vitara, Vitara 2.0L & XL-7)
G99J51051Courtesy of SUZUKI OF AMERICA CORP.