Heater and Cooling Unit Removal and Installation: Installation

WARNING: This page is about a different car, the 2003 Suzuki XL-7 and 2003 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Install heater and cooling unit by reversing removal procedure, noting the following items.
- When installing each part, be careful not to catch any wiring harness.
- When installing steering column assembly, refer to STEERING COLUMN REMOVAL AND INSTALLATION .
Fill engine coolant to radiator.
Enable air bag system. Refer to AIR BAG RESTRAINT SYSTEMS .
Evacuate and charge system. Refer to OPERATION PROCEDURE FOR CHARGING A/C WITH REFRIGERANT .