Steering Lock Assembly (Ignition Switch) Removal and Installation: Removal

WARNING: This page is about a different car, the 2003 Suzuki XL-7 and 2003 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Remove steering column assembly. Refer to STEERING COLUMN REMOVAL AND INSTALLATION .
Using center punch (with sharp point) (1) as shown in the figure, loosen and remove steering lock mounting bolts (2).
NOTE: Use care not to damage aluminum part of steering lock body (3) with center punch (1).

Fig 1: Loosening & Removing Steering Lock Mounting Bolt

Courtesy of SUZUKI OF AMERICA CORP.

Turn ignition key to "ACC" or "ON" position and remove steering lock assembly (3) from steering column assembly (4).