Clutch Fluid Pipe & Hose Removal and Installation: Notes
WARNING: This page is about a different car, the 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Removal
NOTE:
Do not allow fluid to get on painted surface.
- Remove dust and dirt from each joint of hose (2) and pipe (1) to be disconnected and clean around reservoir cap.
- Take out fluid with syringe or such.
- Disconnect fluid pipe (1) from hose (2).
NOTE:
To disconnect pipe (1) from hose (2), separate them by using flare nut wrench (4) and spanner (3) so as not to kink them.