LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Propeller Shaft) >> Repair Instructions >> Propeller Shaft Inspection

Propeller Shaft Inspection

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Inspect propeller shaft and flange yoke for damage, and propeller shaft for runout. If damage is found or shaft runout exceeds its limit, replace.

Propeller shaft runout 

Limit:  0.8 mm (0.031 in.)

Fig 1: Inspecting Propeller Shaft Runout
G02281658Courtesy of SUZUKI OF AMERICA CORP.