Hood Inspection & Adjustment: Adjustment

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Fore-and-aft and right-and-left adjustment:
Loosen 4 mounting bolts (1) for adjustment.

Fig 1: Loosening 4 Mounting Bolts For Adjustment

Courtesy of SUZUKI OF AMERICA CORP.

Hood lock adjustment:
When installing hood lock (1), bring bolt (2) at intersection point of match marks (3) and move it in vertical direction for adjustment, if necessary.

Tightening torque

Hood lock bolt (a): 10 N.m (1.0 kg-m, 7.5 lb-ft)

Fig 2: Installing Hood Lock
Courtesy of SUZUKI OF AMERICA CORP.
Vertical adjustment:
If only one side (right or left) of hood is not level with front fender, make it level by tightening or loosening hood cushion (1).

Fig 3: Tightening Or Loosening Hood Cushion

Courtesy of SUZUKI OF AMERICA CORP.