LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Exterior Trim) >> Repair Instructions >> Front Door Assembly Removal & Installation >> Removal

Front Door Assembly Removal & Installation: Removal

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front fender. Refer to FRONT FENDER REMOVAL & INSTALLATION  .
  2. Disconnect door harness lead wires at each coupler.
  3. Remove stopper pin (1).
    Fig 1: Removing Stopper Pin
    G01356730Courtesy of SUZUKI OF AMERICA CORP.
  4. Support door panel using a jack (3) with a piece of wood (2) placed between jack and panel, as shown.
    Fig 2: Supporting Door Panel
    G01356731Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove door assembly (3) from body (4) by loosening hinge mounting bolts (1, 2).
    Fig 3: Removing Door Assembly From Body
    G01356732Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals