Removal & Installation (2.2L)

WARNING: This page is about a different car, the 2002 Isuzu Trooper, 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Disconnect TP sensor harness connector. See Fig 1. TP sensor is located on throttle body. Remove TP sensor bolts. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Removing & Installing Throttle Position Sensor (2.2L)

Courtesy of ISUZU MOTOR CO.