LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Removal, Overhaul & Installation) >> Engine Sensors & Switches >> Engine Coolant Temperature Sensor >> Removal & Installation (3.2L & 3.5L)

Removal & Installation (3.2L & 3.5L)

WARNING: This page is about a different car, the 2002 Isuzu Trooper, 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Drain radiator coolant. Disconnect ECT sensor harness connector. ECT sensor is located in coolant crossover near upper radiator hose. Remove ECT sensor.
  2. Apply sealer to threads of ECT sensor. Install sensor to coolant crossover. Tighten ECT sensor to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals