Removal & Installation (2.2L)
WARNING: This page is about a different car, the 2002 Isuzu Trooper, 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Remove spark plug cover on top of valve cover. Disconnect Camshaft Position (CMP) sensor harness connector. Remove drive belt. Remove top harness cover on timing belt cover. Remove crankshaft pulley. Remove timing belt cover. Remove CMP sensor mounting bolt. Remove CMP sensor. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .