LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Removal, Overhaul & Installation) >> Emissions Systems >> EVAP Canister >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Isuzu Trooper, 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.

EVAP canister is attached to frame rail under rear of vehicle. Remove hoses from canister. Remove bracket bolts and remove canister. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals