Removal & Installation (3.2L & 3.5L)
WARNING: This page is about a different car, the 2002 Isuzu Trooper, 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
EVAP canister purge solenoid is located on intake manifold near throttle body. See Fig 1. Disconnect harness connector and vacuum hoses. Remove retaining bolt and remove solenoid. To install, reverse removal procedure. Tighten bolt to specification. See TORQUE SPECIFICATIONS .