LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Air Bag Restraint Systems) >> Removal & Installation >> Passenger-Side Air Bag Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, read air bag service precautions section. See AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Disconnect negative battery cable. Open glove box, then while pressing glove box stopper, pull out glove box from instrument panel. Disconnect passenger-side air bag module connector. Remove bolts and screws from passenger-side air bag module. Remove passenger-side air bag module from vehicle. See Fig 1.
  3. To install, reverse removal procedure. Tighten passenger-side air bag module bolts and screws to specification. See TORQUE SPECIFICATIONS . Activate air bag system.
Fig 1: Identifying Passenger-side Air Bag Module
G99C00283Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals