Diagnostic Procedure
WARNING: This page is about a different car, the 2004 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to ON position and ensure AIR BAG warning light bulb is operational. If AIR BAG warning light is okay, go to next step. If AIR BAG warning light is not okay, repair AIR BAG warning light circuit as necessary. See WIRING DIAGRAMS . See WIRE REPAIR .
- Using scan tool, clear all DTCs, then retrieve DTCs. If DTC B1061 is displayed, substitute a known-good SDM. See SENSING & DIAGNOSTIC MODULE (SDM) under REMOVAL & INSTALLATION. If DTC B1061 is not displayed, recheck air bag system. Go to AIR BAG DIAGNOSTIC SYSTEM CHECK under DIAGNOSTICS.