Activating System (Hombre)
- Ensure ignition switch is in LOCK position, and ignition key is removed. Ensure SIR fuse is removed from instrument panel fuse block. Reconnect Yellow SRS 2-pin connector on passenger air bag. Install CPA clip. Install glove box.
- Reconnect Yellow SRS 2-pin connector on driver air bag. Install CPA clip. Install knee bolster, sound insulator and trim panels
- Install SIR fuse. Staying well away from air bag modules, turn ignition switch to RUN position. Ensure AIR BAG warning light flashes 7 times, and then turns off. If AIR BAG warning light does not operate as described, see SYSTEM OPERATION CHECK .
Fig 1: Disconnecting & Connecting Spring-Loaded Lock Connectors (Rodeo, Rodeo Sport, Trooper & VehiCROSS)