Esteem, Grand Vitara, Vitara & XL7

Disconnect hazard warning switch connector. See HAZARD WARNING SWITCH under REMOVAL & INSTALLATION. Using DVOM, check for continuity between switch terminals with switch in specified position. See Fig 1. See HAZARD WARNING SWITCH CONTINUITY (EXCEPT SWIFT) table. If continuity is not as specified, replace faulty hazard warning switch.

HAZARD WARNING SWITCH CONTINUITY (EXCEPT SWIFT)

Switch Position

⁽¹⁾ Continuity Between Terminals No.

OFF

4 & 5; 6 & 8

1, 2 & 3; 4 & 5; 7 & 8

⁽¹⁾

See Fig 1

Fig 1: Identifying Hazard Warning Switch Terminals (Except Swift)

Courtesy of SUZUKI OF AMERICA CORP.