LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1997 >> Sidekick Sport JS, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Power Brake Booster >> Removal & Installation

Removal & Installation

  1. Remove master cylinder. Disconnect vacuum hose from booster. Disconnect push rod clevis from brake pedal arm. Remove 4 nuts attaching booster to firewall. Remove booster.
  2. To install, reverse removal procedure. Bleed hydraulic system. Check and adjust push rod clevis measurement from booster firewall mounting surface (with gasket attached) to center of brake pedal clevis pin hole. See Figure.
scientia non olet · About LEMON Manuals