LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1997 >> Sidekick Sport JS, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Rotor >> Removal & Installation

Removal & Installation

  1. Raise and support vehicle. Remove front wheel. Remove caliper and wire aside. Mount dial indicator and check rotor runout before removal. Maximum runout is .006" (.15 mm) for Sidekick and X90. Maximum runout is .004" (.10 mm) for Esteem and Swift.
  2. Remove caliper carrier. Install two 8-mm bolts into rotor holes between wheel studs. On Swift, remove screws before installing 8-mm bolts. Alternately tighten bolts and pull rotor from hub. To install, place rotor on hub and reverse removal procedure.
scientia non olet · About LEMON Manuals