Contact Coil & Combination Switch: Installation

WARNING: This page is about a different car, the 1996 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: New contact coil and combination switch assembly is supplied with contact coil set and held at center position with a lock pin and seal. Remove lock pin after installing contact coil and combination switch assembly to steering column.

To install, reverse removal procedure. After all components are installed, reactivate SRS system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Check AIR BAG indicator light to ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK .