Centering Contact Coil
WARNING: This page is about a different car, the 1996 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
- If coil assembly has been removed from steering column and is being reinstalled, go to step 2). New coil assemblies are supplied pre-centered.
- Ensure front wheels face straight ahead when installing or removing a coil assembly. If coil is removed without wheels in straight-ahead position and steering wheel has not been moved, same coil can be reinstalled if coil hub also has not been rotated.
- Ensure ignition switch is in LOCK position. If there is a possibility that coil has been moved, turn SRS coil counterclockwise by hand until it reaches its stop. Turn SRS coil clockwise 2 1/2 turns and align center mark with alignment mark. Coil is now centered. See Fig 1 .