LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1992 >> Samurai JA >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Water Pump >> Removal

Water Pump: Removal

  1. Drain cooling system. Disconnect negative battery cable. Remove drive belts. Discharge A/C system using approved refrigerant recovery/recycling equipment and disconnect compressor flexible suction hose from suction pipe (if equipped). On Samurai and Sidekick, remove cooling fan, fan shroud and fan clutch.
  2. On all models, remove pump pulley. Ensure No. 1 piston is at TDC of compression stroke. Remove crankshaft pulley bolts and crankshaft pulley. Remove timing belt cover. See TIMING BELT  under REMOVAL & INSTALLATION. Remove dipstick and tube. Remove alternator mounting bracket. Remove water pump.