LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1992 >> Samurai JA >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Rocker Arm & Valve Lash Adjuster >> Installation (1.3L SOHC & 1.6L)

Installation (1.3L SOHC & 1.6L)

To install, reverse removal procedure. Intake rocker shaft has a .55" (14 mm) stepped end. Exhaust rocker shaft has a .59" (15 mm) stepped end. Ensure intake rocker shaft stepped end faces front of engine and exhaust rocker shaft stepped end faces rear of engine. Adjust valve clearance. See VALVE CLEARANCE ADJUSTMENT  under ADJUSTMENTS.

scientia non olet · About LEMON Manuals