LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1992 >> Samurai JA >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Cylinder Head >> Removal (Samurai)

Removal (Samurai)

  1. Release fuel pressure. See FUEL PRESSURE RELEASE  under REMOVAL & INSTALLATION. Remove intake and exhaust manifolds. See INTAKE MANIFOLD  and EXHAUST MANIFOLD under REMOVAL & INSTALLATION.
  2. Remove timing belt. See TIMING BELT  under REMOVAL & INSTALLATION. Loosen cylinder head bolts in reverse order of tightening sequence. See Figure . Loosen head bolts in 2 or 3 steps to prevent cylinder head warpage. Remove bolts and cylinder head.
scientia non olet · About LEMON Manuals