LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1992 >> Samurai JA >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Cylinder Head >> Installation

Cylinder Head: Installation

To install cylinder head, reverse removal procedure. Use NEW  head and manifold gaskets. Tighten cylinder head bolts to specifications in 3 steps using proper sequence. See Fig 1 . See TORQUE SPECIFICATIONS  table. Adjust timing belt.

Fig 1: Cylinder Head Bolt Tightening Sequence
G81627Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals