LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1991 >> Sidekick JL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Timing Belt >> Removal (1.3L & 1.6L SOHC)

Removal (1.3L & 1.6L SOHC)

  1. On Sidekick and Samurai, remove cooling fan and clutch. Remove fan shroud. Discharge A/C system and disconnect compressor flexible suction hose from suction pipe (if equipped). Remove A/C compressor belt (if equipped).
  2. On Swift, raise vehicle and remove fender apron extension by pushing center pin into clip. DO NOT  push in too far as pin may fall into fender. On all models, loosen alternator, and remove water pump pulley and belt.
  3. Remove crankshaft pulley. On Swift, it will be necessary to remove center bolt to remove crankshaft pulley if engine is in vehicle. Remove timing belt cover. Move up and secure timing belt tensioner.
  4. Mark belt with an arrow indicating direction of rotation for installation reference, and remove timing belt. Remove timing belt from camshaft and crankshaft sprocket.
scientia non olet · About LEMON Manuals