LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1991 >> Samurai JL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Camshaft >> Removal (SOHC)

Removal (SOHC)

  1. Remove cylinder head. See CYLINDER HEAD  . Remove rocker arms and shafts. See ROCKER ARM & VALVE LASH ADJUSTER  under REMOVAL & INSTALLATION.
  2. Use .35" (9 mm) rod to lock camshaft. See Fig 1 . Remove camshaft sprocket. Remove camshaft from rear of head. Remove oil seal.
Fig 1: Locking Camshaft for Timing Belt Sprocket Removal (SOHC)
G91C00168Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals