LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1991 >> Samurai JL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. Lubricate camshaft lobes and camshaft bearing journals. Install camshaft and new oil seal in cylinder head. On DOHC model, install oil seal flush with bearing cap surface. Install camshaft bearing caps and tighten in sequence. See Fig 1 .
  2. On all models, install camshaft sprocket. Ensure camshaft sprocket marks align with timing marks on cylinder head. See Figure and Figure . To complete installation, reverse removal procedure.
Fig 1: Camshaft Bearing Cap Bolt Tightening Sequence (DOHC)
G90E00343Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals