LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1991 >> Samurai JL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0] >> Overhaul >> Cylinder Block

Cylinder Block

  1. Inspect block for distortion of deck surface. Warpage limit is .002" (.05 mm). Inspect block for cracks, scratches and other defects. Measure bores at 3 levels for wear, taper and out-of-round condition.
  2. If bore wear, taper or out-of-round exceed specification, rebore cylinders. See CYLINDER BLOCK  table under ENGINE SPECIFICATIONS.