LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Swift GS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Rocker Arms & Shafts (Swift) >> Inspection

Rocker Arms & Shafts (Swift): Inspection

  1. Rocker arm-to-shaft clearance limit is .0035" (.089 mm). Rocker arm shaft runout limit is .004" (.10 mm).
  2. If tip of rocker arm adjusting screw is worn, replace screw. If cam riding face of rocker arm is badly worn, replace rocker arm.
scientia non olet · About LEMON Manuals