LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Swift GS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Rocker Arms & Shafts (Except Swift) >> Removal (Samurai & Sidekick)

Removal (Samurai & Sidekick)

Remove cylinder head. See CYLINDER HEAD section of this article. Remove distributor and distributor case. Loosen all valve adjustment lock nuts and valve adjusting screws. Remove 10 rocker arm shaft retaining screws. Slide rocker arm shaft(s) out of head assembly. Remove rocker arms and springs.

NOTE: On Samurai and Sidekick, cylinder head removal is necessary to obtain enough clearance for rocker arm shaft and camshaft removal.
scientia non olet · About LEMON Manuals