LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Swift GS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Rocker Arm & Valve Lash Adjuster (Sidekick) >> Installation

Rocker Arm & Valve Lash Adjuster (Sidekick): Installation

To install, reverse removal procedure. Intake rocker shaft has a .55" (14 mm) stepped end. Exhaust rocker shaft has a .59" (15 mm) stepped end. Ensure intake rocker shaft stepped end faces front of engine and exhaust rocker shaft stepped end faces rear of engine. Adjust valve clearance.

scientia non olet · About LEMON Manuals