LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Swift GS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

  1. Remove water pump, crankshaft pulley and alternator. Remove timing belt cover and timing belt. See TIMING BELT.
  2. Drain engine oil. Remove oil dipstick and oil pan. Remove oil pump pick-up screen. Remove oil pump assembly. Remove oil pump rotor plate.
  3. Mark outer gear with felt pen for reassembly reference. Remove inner and outer oil pump gears. Remove plug, relief spring and relief valve. Drive out oil seal.
scientia non olet · About LEMON Manuals