LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Swift GS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0] >> Overhaul >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. Remove cylinder head. See CYLINDER HEAD in ENGINE, MANIFOLDS & CYLINDER HEAD section. Remove oil dipstick guide, oil pan and screen. Ensure connecting rods and rod caps are marked for reassembly reference. Remove ridge from top of cylinder bores.
  2. Remove connecting rod caps. Install protective hose over connecting rod bolts. Remove connecting rod and piston assembly through top of cylinder block. Mark cylinder number on piston crown. Remove piston rings.
scientia non olet · About LEMON Manuals