Cylinder Block Specifications
CYLINDER BLOCK SPECIFICATIONS
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| 1.3L | ||||||
| Cylinder Bore | ||||||
| Standard Diameter (1) | ||||||
| Marked 1 | 2.9138-2.9142 (74.010-74.020) | |||||
| Marked 2 | 2.9134-2.9138 (74.000-74.010) | |||||
| Maximum Taper | .0039 (.10) | |||||
| Maximum Out-of-Round | .0039 (.10) | |||||
| Maximum Deck Warpage | .002 (.05) | |||||
| 1.6L | ||||||
| Cylinder Bore | ||||||
| Standard Diameter (1) | ||||||
| Marked 1 | 2.9520-2.9524 (75.010-75.020) | |||||
| Marked 2 | 2.9516-2.9520 (75.000-75.010) | |||||
| Maximum Taper | .0039 (.10) | |||||
| Maximum Out-of-Round | .0039 (.10) | |||||
| Maximum Deck Warpage | .002 (.05) | |||||
|
||||||