LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Swift GLX >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (1.0L 3-CYL - VIN [5] & 1.0L 3-CYL Turbo - VIN [2]) >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

WARNING: This page is about a different car, the 1987 Chevrolet Sprint. However, it is still accessible from the selected car via links, so may be relevant.

Lower engine and transaxle into vehicle. Install rear mount nut. Raise vehicle and support engine. Remove front mount and bracket at frame. Align stud of motor mount with hole in engine bracket. Lower engine and install bolts into frame bracket. To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals